initial commit

Makefile

@@ -0,0 +1,53 @@
+MKFILES := mk
+RTL8710_PATH ?= ./rtl8710_openocd
+
+# build dir
+BUILD_DIR ?= build
+BIN_DIR := $(BUILD_DIR)/bin
+
+# OTA config
+OTA_IDX ?= 1
+IMAGE2_OTA ?= image2_all_ota$(OTA_IDX).bin
+BOOTLOADER ?= $(BUILD_DIR)/boot/boot_all.o
+
+ifneq ($(OTA_IDX),1)
+ifneq ($(OTA_IDX),2)
+    $(error OTA_IDX must be "1" or "2")
+endif
+endif
+
+FLASH_ADDRESS := $(if $(OTA_IDX),0x80000,0x0B000)
+FLASH_FILE := $(BIN_DIR)/image2_all_ota$(OTA_IDX).bin
+
+.PHONY: all
+all: ram_all
+
+# build targets
+.PHONY: ram_all mp clean build_info
+ram_all:
+	$(MAKE) -f $(MKFILES)/application.mk
+
+mp clean build_info:
+	$(MAKE) -f $(MKFILES)/application.mk $@
+
+include $(RTL8710_PATH)/rtl8710-openocd.mk
+
+INTERFACE := jlink
+OPENOCD_BASE := openocd -f interface/$(INTERFACE).cfg \
+	-f $(RTL8710_SCRIPT_PATH)/rtl8710.ocd \
+	-c "init" -c "reset halt"
+
+.PHONY: flash
+flash:
+	@$(OPENOCD_BASE) \
+		-c 'rtl8710_flash_auto_erase 1' \
+		-c 'rtl8710_flash_auto_verify 1' \
+		-c 'rtl8710_flash_write $(FLASH_FILE) $(FLASH_ADDRESS)' \
+		-c 'rtl8710_reboot' \
+		-c 'reset run' \
+		-c 'shutdown'
+
+# flasher targets
+.PHONY: rtl-test rtl-mac rtl-dump rtl-full-erase rtl-restore rtl-restore-nae rtl-verify rtl-reset
+
+export MKFILES OTA_IDX BUILD_DIR BIN_DIR IMAGE2_OTA BOOTLOADER