initial commit

2024-12-15 00:34:01 +06:00
commit 31efbc726f
1576 changed files with 657692 additions and 0 deletions
--- a/lib/amb1_sdk/soc/realtek/8195a/fwlib/rtl8195a/rtl8195a.h
+++ b/lib/amb1_sdk/soc/realtek/8195a/fwlib/rtl8195a/rtl8195a.h
@@ -0,0 +1,169 @@
+/*
+ *  Routines to access hardware
+ *
+ *  Copyright (c) 2013 Realtek Semiconductor Corp.
+ *
+ *  This module is a confidential and proprietary property of RealTek and
+ *  possession or use of this module requires written permission of RealTek.
+ */
+#ifndef _HAL_8195A_H_
+#define _HAL_8195A_H_
+
+#include "platform_autoconf.h"
+#include "basic_types.h"
+#include "section_config.h"
+#include "rtl8195a_sys_on.h"
+#include "rtl8195a_peri_on.h"
+#include "hal_platform.h"
+#include "hal_pinmux.h"
+#include "hal_api.h"
+#include "hal_peri_on.h"
+#include "hal_misc.h"
+#include "hal_irqn.h"
+#include "hal_vector_table.h"
+#include "hal_diag.h"
+#include "hal_spi_flash.h"
+#include "rtl8195a_spi_flash.h"
+#include "hal_timer.h"
+#include "hal_util.h"
+#include "hal_efuse.h"
+#include "hal_soc_ps_monitor.h"
+#include "diag.h"
+#include "hal_common.h"
+#include "hal_soc_ps_monitor.h"
+
+/* ----------------------------------------------------------------------------
+   -- Cortex M3 Core Configuration
+   ---------------------------------------------------------------------------- */
+
+/*!
+ * @addtogroup Cortex_Core_Configuration Cortex M0 Core Configuration
+ * @{
+ */
+
+#define __CM3_REV                      0x0200    /**< Core revision r0p0 */
+#define __MPU_PRESENT                  1         /**< Defines if an MPU is present or not */
+#define __NVIC_PRIO_BITS               4         /**< Number of priority bits implemented in the NVIC */
+#define __Vendor_SysTickConfig         1         /**< Vendor specific implementation of SysTickConfig is defined */
+
+#include "core_cm3.h"
+
+#ifdef CONFIG_TIMER_EN
+#include "hal_timer.h"
+#endif
+
+#ifdef CONFIG_GDMA_EN
+#include "hal_gdma.h"
+#include "rtl8195a_gdma.h"
+#endif
+
+#ifdef CONFIG_GPIO_EN
+#include "hal_gpio.h"
+#include "rtl8195a_gpio.h"
+#endif
+
+#ifdef CONFIG_SPI_COM_EN
+#include "hal_ssi.h"
+#include "rtl8195a_ssi.h"
+#endif
+
+#ifdef CONFIG_UART_EN
+#include "hal_uart.h"
+#include "rtl8195a_uart.h"
+#endif
+
+#ifdef CONFIG_I2C_EN
+#include "hal_i2c.h"
+#include "rtl8195a_i2c.h"
+#endif
+
+#ifdef CONFIG_PCM_EN
+#include "hal_pcm.h"
+#include "rtl8195a_pcm.h"
+#endif
+
+#ifdef CONFIG_PWM_EN
+#include "hal_pwm.h"
+#include "rtl8195a_pwm.h"
+#endif
+
+#ifdef CONFIG_I2S_EN
+#include "hal_i2s.h"
+#include "rtl8195a_i2s.h"
+#endif
+
+#ifdef CONFIG_DAC_EN
+#include "hal_dac.h"
+#include "rtl8195a_dac.h"
+#endif
+
+#ifdef CONFIG_ADC_EN
+#include "hal_adc.h"
+#include "rtl8195a_adc.h"
+#endif
+
+#ifdef CONFIG_SDR_EN
+#endif
+
+#ifdef CONFIG_SPIC_EN
+#endif
+
+#ifdef CONFIG_SDIO_DEVICE_EN
+#include "hal_sdio.h"
+#endif
+
+#ifdef CONFIG_NFC_EN
+#include "hal_nfc.h"
+#include "rtl8195a_nfc.h"
+#endif
+
+#ifdef CONFIG_WDG
+#include "rtl8195a_wdt.h"
+#endif
+
+#ifdef CONFIG_USB_EN
+#include "hal_usb.h"
+#include "rtl8195a_usb.h"
+#endif
+
+#include "hal_log_uart.h"
+
+#ifdef CONFIG_MII_EN
+#include "hal_mii.h"
+#include "rtl8195a_mii.h"
+#endif
+
+//Secure boot
+#define SECURE_BOOT 0
+#define ROLLBACK 0
+#define SWAPCHECK 0
+
+// firmware information, located at the header of Image2
+#define FW_VERSION          (0x0100)
+#define FW_SUBVERSION       (0x0001)
+#define FW_CHIP_ID          (0x8195)
+#define FW_CHIP_VER         (0x01)
+#define FW_BUS_TYPE         (0x01)          // the iNIC firmware type: USB/SDIO
+#define FW_INFO_RSV1        (0x00)          // the firmware information reserved
+#define FW_INFO_RSV2        (0x00)          // the firmware information reserved
+#define FW_INFO_RSV3        (0x00)          // the firmware information reserved
+#define FW_INFO_RSV4        (0x00)          // the firmware information reserved
+
+#define FLASH_RESERVED_DATA_BASE		0x8000  // reserve 32K for Image1
+#define FLASH_SYSTEM_DATA_ADDR			0x9000  // reserve 32K+4K for Image1 + Reserved data
+// Flash Map for Calibration data
+#define FLASH_CAL_DATA_BASE				0xA000
+#define FLASH_CAL_DATA_ADDR(_offset)	(FLASH_CAL_DATA_BASE + _offset)
+#define FLASH_CAL_DATA_SIZE				0x1000
+#define FLASH_SECTOR_SIZE				0x1000
+// SPIC Calibration Data
+#define FLASH_SPIC_PARA_OFFSET          0x80
+#define FLASH_SPIC_PARA_BASE            (FLASH_SYSTEM_DATA_ADDR+FLASH_SPIC_PARA_OFFSET)
+// SDRC Calibration Data
+#define FLASH_SDRC_PARA_OFFSET          0x180
+#define FLASH_SDRC_PARA_BASE            (FLASH_SYSTEM_DATA_ADDR+FLASH_SDRC_PARA_OFFSET)
+// ADC Calibration Data
+#define FLASH_ADC_PARA_OFFSET           0x200
+#define FLASH_ADC_PARA_BASE             (FLASH_SYSTEM_DATA_ADDR+FLASH_ADC_PARA_OFFSET)
+
+#endif //_HAL_8195A_H_