#ifndef _FUNCONFIG_H
#define _FUNCONFIG_H

// #define FUNCONF_USE_PLL 1               // Use built-in 2x PLL 
// #define FUNCONF_USE_HSI 1               // Use HSI Internal Oscillator
// #define FUNCONF_USE_HSE 0               // Use External Oscillator
// #define FUNCONF_HSITRIM 0x10            // Use factory calibration on HSI Trim.
// #define FUNCONF_SYSTEM_CORE_CLOCK 48000000  // Computed Clock in Hz (Default only for 003, other chips have other defaults)
// #define FUNCONF_HSE_BYPASS 0            // Use HSE Bypass feature (for oscillator input)
// #define FUNCONF_USE_CLK_SEC	1			// Use clock security system, enabled by default
#define FUNCONF_USE_DEBUGPRINTF 1
// #define FUNCONF_USE_UARTPRINTF  0
// #define FUNCONF_NULL_PRINTF 0           // Have printf but direct it "nowhere"
#define FUNCONF_SYSTICK_USE_HCLK 1      // Should systick be at 48 MHz or 6MHz?
// #define FUNCONF_TINYVECTOR 0            // If enabled, Does not allow normal interrupts.
#define FUNCONF_UART_PRINTF_BAUD 9600 // Only used if FUNCONF_USE_UARTPRINTF is set.
// #define FUNCONF_DEBUGPRINTF_TIMEOUT 160000 // Arbitrary time units
// #define FUNCONF_ENABLE_HPE 1            // Enable hardware interrupt stack.  Very good on QingKeV4, i.e. x035, v10x, v20x, v30x, but questionable on 003.
// #define FUNCONF_USE_5V_VDD 0            // Enable this if you plan to use your part at 5V - affects USB and PD configration on the x035.
// #define FUNCONF_DEBUG      0            // Log fatal errors with "printf"

#define CH32V003 1

#endif