24 lines
1.5 KiB
C
24 lines
1.5 KiB
C
#ifndef _FUNCONFIG_H
|
|
#define _FUNCONFIG_H
|
|
|
|
// #define FUNCONF_USE_PLL 1 // Use built-in 2x PLL
|
|
// #define FUNCONF_USE_HSI 1 // Use HSI Internal Oscillator
|
|
// #define FUNCONF_USE_HSE 0 // Use External Oscillator
|
|
// #define FUNCONF_HSITRIM 0x10 // Use factory calibration on HSI Trim.
|
|
// #define FUNCONF_SYSTEM_CORE_CLOCK 48000000 // Computed Clock in Hz (Default only for 003, other chips have other defaults)
|
|
// #define FUNCONF_HSE_BYPASS 0 // Use HSE Bypass feature (for oscillator input)
|
|
// #define FUNCONF_USE_CLK_SEC 1 // Use clock security system, enabled by default
|
|
#define FUNCONF_USE_DEBUGPRINTF 1
|
|
// #define FUNCONF_USE_UARTPRINTF 0
|
|
// #define FUNCONF_NULL_PRINTF 0 // Have printf but direct it "nowhere"
|
|
#define FUNCONF_SYSTICK_USE_HCLK 1 // Should systick be at 48 MHz or 6MHz?
|
|
// #define FUNCONF_TINYVECTOR 0 // If enabled, Does not allow normal interrupts.
|
|
// #define FUNCONF_UART_PRINTF_BAUD 115200 // Only used if FUNCONF_USE_UARTPRINTF is set.
|
|
// #define FUNCONF_DEBUGPRINTF_TIMEOUT 160000 // Arbitrary time units
|
|
// #define FUNCONF_ENABLE_HPE 1 // Enable hardware interrupt stack. Very good on QingKeV4, i.e. x035, v10x, v20x, v30x, but questionable on 003.
|
|
// #define FUNCONF_USE_5V_VDD 0 // Enable this if you plan to use your part at 5V - affects USB and PD configration on the x035.
|
|
// #define FUNCONF_DEBUG 0 // Log fatal errors with "printf"
|
|
|
|
#define CH32V003 1
|
|
|
|
#endif |