first commit

inc/gpib_defs.h

@@ -0,0 +1,91 @@
+#ifndef GPIB_DEFS_H
+#define GPIB_DEFS_H
+
+#include "ch32fun.h"
+
+// #define GPIB_DEBUG 1
+
+// Control Lines (Active LOW)
+#define PIN_EOI PB3
+#define PIN_REN PB11
+#define PIN_ATN PA8
+#define PIN_SRQ PA9
+#define PIN_IFC PA10
+#define PIN_NDAC PA11  // Handshake: Not Data Accepted
+#define PIN_NRFD PA12  // Handshake: Not Ready For Data
+#define PIN_DAV PA15   // Handshake: Data Valid
+
+// GPIB Commands
+
+// enum cmd_byte {
+//   GTL = 0x1, /* go to local            */
+//   SDC = 0x4, /* selected device clear  */
+//   PP_CONFIG = 0x5,
+//   GET = 0x8,  /* group execute trigger  */
+//   TCT = 0x9,  /* take control           */
+//   LLO = 0x11, /* local lockout          */
+//   DCL = 0x14, /* device clear           */
+//   PPU = 0x15, /* parallel poll unconfigure */
+//   SPE = 0x18, /* serial poll enable     */
+//   SPD = 0x19, /* serial poll disable    */
+//   CFE = 0x1f, /* configure enable       */
+//   LAD = 0x20, /* value to be 'ored' in to obtain listen address */
+//   UNL = 0x3F, /* unlisten               */
+//   TAD = 0x40, /* value to be 'ored' in to obtain talk address   */
+//   UNT = 0x5F, /* untalk                 */
+//   SAD = 0x60, /* my secondary address (base) */
+//   PPE = 0x60, /* parallel poll enable (base) */
+//   PPD = 0x70  /* parallel poll disable  */
+// };
+
+#define GPIB_CMD_GTL 0x01       /* go to local */
+#define GPIB_CMD_SDC 0x04       /* selected device clear */
+#define GPIB_CMD_PP_CONFIG 0x05 /* parallel poll configure */
+#define GPIB_CMD_GET 0x08       /* group execute trigger */
+#define GPIB_CMD_TCT 0x09       /* take control */
+#define GPIB_CMD_LLO 0x11       /* local lockout */
+#define GPIB_CMD_DCL 0x14       /* device clear */
+#define GPIB_CMD_PPU 0x15       /* parallel poll unconfigure */
+#define GPIB_CMD_SPE 0x18       /* serial poll enable */
+#define GPIB_CMD_SPD 0x19       /* serial poll disable */
+#define GPIB_CMD_CFE 0x1F       /* configure enable */
+#define GPIB_CMD_LAD 0x20       /* listen address (OR with addr) */
+#define GPIB_CMD_UNL 0x3F       /* unlisten */
+#define GPIB_CMD_TAD 0x40       /* talk address (OR with addr) */
+#define GPIB_CMD_UNT 0x5F       /* untalk */
+#define GPIB_CMD_SAD 0x60       /* secondary address base */
+#define GPIB_CMD_PPE 0x60       /* parallel poll enable */
+#define GPIB_CMD_PPD 0x70       /* parallel poll disable */
+
+// Address Groups
+#define GPIB_LAG_BASE 0x20  // Listen Address Group base
+#define GPIB_TAG_BASE 0x40  // Talk Address Group base
+#define GPIB_SCG_BASE 0x60  // Secondary Command Group base
+
+#define GPIB_ASSERT(pin) funDigitalWrite(pin, 0)
+#define GPIB_RELEASE(pin) funDigitalWrite(pin, 1)
+#define GPIB_READ(pin) funDigitalRead(pin)
+
+// Data Lines (DIO1-DIO8)
+#define PIN_DIO1 PB9
+#define PIN_DIO2 PB8
+#define PIN_DIO3 PB5
+#define PIN_DIO4 PB4
+#define PIN_DIO5 PB15
+#define PIN_DIO6 PB14
+#define PIN_DIO7 PB13
+#define PIN_DIO8 PB12
+
+#define MASK_DIO1 (1U << 9)
+#define MASK_DIO2 (1U << 8)
+#define MASK_DIO3 (1U << 5)
+#define MASK_DIO4 (1U << 4)
+#define MASK_DIO5 (1U << 15)
+#define MASK_DIO6 (1U << 14)
+#define MASK_DIO7 (1U << 13)
+#define MASK_DIO8 (1U << 12)
+
+static const int DIO_PINS[] = {PIN_DIO1, PIN_DIO2, PIN_DIO3, PIN_DIO4,
+                               PIN_DIO5, PIN_DIO6, PIN_DIO7, PIN_DIO8};
+
+#endif