chore: mv symbol file

Makefile

@@ -1,4 +1,3 @@
-# Toolchain
 PREFIX = arm-none-eabi-
 CC = $(PREFIX)gcc
 AS = $(PREFIX)as
@@ -6,7 +5,6 @@ LD = $(PREFIX)ld
 OBJCOPY = $(PREFIX)objcopy
 SIZE = $(PREFIX)size
 
-# Project configuration
 PROJECT = firmware
 MCU = cortex-m4
 FLASH_START = 0x00000000
@@ -15,86 +13,79 @@ LD_FILE=linker.ld
 
 RAM_START := 0x10002000
 
-# Compiler flags
 CFLAGS = -mcpu=$(MCU) -mthumb \
     -Wall -Wextra -g3 \
     -Os -ffunction-sections -fdata-sections \
     -nostartfiles -Wl,-T,$(LD_FILE) -u main -Wl,--gc-sections \
     -DLOAD_ADDRESS=$(LOAD_ADDRESS)
 
-ASFLAGS = \
+ASFLAGS = -mcpu=$(MCU) -mthumb -g
-    -mcpu=$(MCU) -mthumb \
-    -g
 
-LDFLAGS = \
+LDFLAGS = -T linker.ld -Map=$(BUILD_DIR)/$(PROJECT).map \
-    -T linker.ld -Map=$(BUILD_DIR)/$(PROJECT).map \
     --gc-sections --no-warn-rwx-segments \
     --defsym=_RAM_START_ADDR=$(RAM_START)
 
-# Directories
 SRC_DIR = src
 BUILD_DIR = build
 INCLUDE_DIR = include
 
-# Source files
+# todo
-SRCS = $(wildcard $(SRC_DIR)/*.c)
-ASM_SRCS = $(wildcard $(SRC_DIR)/*.s)
-OBJS = $(SRCS:$(SRC_DIR)/%.c=$(BUILD_DIR)/%.o)
-ASM_OBJS = $(ASM_SRCS:$(SRC_DIR)/%.s=$(BUILD_DIR)/%.o)
-
-# Include paths
 INCLUDES = -I$(INCLUDE_DIR)
 
-# Output files
+SRCS := $(wildcard $(SRC_DIR)/*.c) $(wildcard $(SRC_DIR)/*.s)
+OBJS := $(patsubst $(SRC_DIR)/%.c,$(BUILD_DIR)/%.o,$(filter %.c,$(SRCS))) \
+        $(patsubst $(SRC_DIR)/%.s,$(BUILD_DIR)/%.o,$(filter %.s,$(SRCS)))
+
 ELF = $(BUILD_DIR)/$(PROJECT).elf
 BIN = $(BUILD_DIR)/$(PROJECT).bin
 HEX = $(BUILD_DIR)/$(PROJECT).hex
 
-# flashing
+# flash
 INTERFACE = stlink
 OPENOCD_BASE=openocd -f interface/$(INTERFACE).cfg -f rtl8710_openocd/script/rtl8710.ocd -c "init" -c "reset" -c "halt"
 FLASH_BIN = $(BUILD_DIR)/$(PROJECT).bin
 
-.PHONY: all clean flash size
+.PHONY: all clean flash size test mac dump dump0 full_erase restore restore_nae verify reset
 
-# Default target
 all: $(BUILD_DIR) $(ELF) $(BIN) $(HEX) size
 
-# Create build directory
 $(BUILD_DIR):
 	mkdir -p $(BUILD_DIR)
 
-# Compile C files
 $(BUILD_DIR)/%.o: $(SRC_DIR)/%.c
 	@echo "CC $<"
 	@$(CC) $(CFLAGS) $(INCLUDES) -c $< -o $@
 
-# Compile assembly files
 $(BUILD_DIR)/%.o: $(SRC_DIR)/%.s
 	@echo "AS $<"
 	@$(AS) $(ASFLAGS) -c $< -o $@
 
-# Link
 $(ELF): $(OBJS) $(ASM_OBJS)
 	@echo "LD $@"
 	@$(LD) $(LDFLAGS) -o $@ $^
 
-# Generate binary
 $(BIN): $(ELF)
 	@echo "OBJCOPY $@"
 	@$(OBJCOPY) -O binary $< $@
 
-# Generate Intel HEX file
 $(HEX): $(ELF)
 	@echo "OBJCOPY $@"
 	@$(OBJCOPY) -O ihex $< $@
 
-# Print size information
 size: $(ELF)
 	@echo
 	@$(SIZE) $<
 
-# flash commands
+clean:
+	rm -rf $(BUILD_DIR)
+
+# flash cmds
+flash:
+	@$(OPENOCD_BASE) -c 'rtl8710_flash_auto_erase 1' \
+	-c 'rtl8710_flash_auto_verify 1' \
+	-c 'rtl8710_flash_write $(FLASH_BIN) 0' \
+	-c 'rtl8710_reboot' -c 'reset run' -c shutdown
+
 test:
 	$(OPENOCD_BASE) -c "rtl8710_flash_read_id" -c "shutdown"
 
@@ -104,15 +95,6 @@ mac:
 dump:
 	$(OPENOCD_BASE) -c "rtl8710_flash_read_id" -c "rtl8710_flash_read dump.bin 0 1048576" -c "shutdown"
 
-dump0:
-	$(OPENOCD_BASE) -c "rtl8710_flash_read_id" -c "rtl8710_flash_read dump0.bin 0 4096" -c "shutdown"
-
-flash:
-	@$(OPENOCD_BASE) -c 'rtl8710_flash_auto_erase 1' \
-	-c 'rtl8710_flash_auto_verify 1' \
-	-c 'rtl8710_flash_write $(FLASH_BIN) 0' \
-	-c 'rtl8710_reboot' -c 'reset run' -c shutdown
-
 full_erase:
 	$(OPENOCD_BASE) -c "rtl8710_flash_mass_erase" -c shutdown
 
@@ -126,9 +108,4 @@ verify:
 	$(OPENOCD_BASE) -c "rtl8710_flash_verify dump.bin 0" -c shutdown
 
 reset:
-	$(OPENOCD_BASE) -c "rtl8710_reboot" -c shutdown
+	$(OPENOCD_BASE) -c "rtl8710_reboot" -c shutdown
-
-# Clean build files
-clean:
-	rm -rf $(BUILD_DIR)
-

linker.ld

@@ -1,5 +1,5 @@
 /* from https://github.com/ambiot/amb1_sdk/blob/master/project/realtek_amebaz_va0_example/GCC-RELEASE/export-rom_symbol_v01.txt */
-INCLUDE "./rtl8710_openocd/export-rom_symbol_v01.txt"
+INCLUDE "export-rom_symbol_v01.txt"
 
 MEMORY
 {